Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BM852-100-L-140
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Output shaft:||Shaft||Shaft Seal Material:||Viton|
|Output Diameter (in):||2.000 in||Gear Type:||Worm|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Ratio:||100:1|
|Output Shaft Assembly Code:||L||Housing material:||Cast Iron|
|Overhung Load:||3,600||Input Diameter (in):||0.875 in|
|Output Torque:||4646||Center distance (inch):||5.25|
|Ratio Range:||100:1 to 250:1||No. of Gear Reductions:||Single|
|Output Shaft Orientation:||L||Mounting Style:||Base|
|Input Bore (C Face):||0.875||Reducer:||Worm - Right Angle|
|Frame Size:||140||Input HP:||2.072|
|Output Key:||1/2 X 3.50||Series Style:||GR-BM-L|
|Model Code:||BM852||Input Style:||C-Face Coupled|
|Output HP:||1.291||Input RPM:||1,750|
|Output RPM:||17||Service Factor:||1|
|Product Type:||Right Angle||Series:||GR Series - Ironman Worm Gear Reducers|
|Assembly:||BM-L||Input Keyway (C Face):||3/16 x 3/32|
|Reducer Style:||Worm - Right Angle||Gear Drive Reductions:||Single|