Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-B852-5-R
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Packaged Length:||40||Packaged Width:||37|
|Input Style:||Shaft||Input HP:||32.51|
|No. of Gear Reductions:||Single||Input RPM:||1,750|
|Series Style:||GR-B-R||Series Type:||Cast Iron 800 Worm Gear Reducers|
|Output Shaft Orientation:||R||Output RPM:||350|
|Series Code:||GR||Reducer Style:||Worm - Right Angle|
|Output Key:||1/2 X 3.50||Output Style:||R|
|Output Torque:||5753||Output Shaft Assembly Code:||R|
|Overhung Load:||3,100||Output HP:||31.17|
|Mounting Style:||Base||Product Type:||Right Angle|
|Gear Drive Reductions:||Single||Gear Type:||Worm|
|Reducer:||Worm - Right Angle||Model Code:||B852|
|Shaft Seal Material:||Viton||Input Diameter (in):||1.25 in|
|Service Factor:||1||Output shaft:||Shaft|
|Ratio Range:||5:1||Series:||GR Series - Ironman Worm Gear Reducers|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Output Diameter (in):||2.000 in|
|Housing material:||Cast Iron||Assembly:||B-R|
|Ratio:||5:1||Input Keyway:||1/4 X 3.00|
|Center distance (inch):||5.25|