Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BM852-10-D-250
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Input HP:||23.15||Reducer:||Worm - Right Angle|
|Output RPM:||175||Output Key:||1/2 X 3.50|
|Product Type:||Right Angle||Housing material:||Cast Iron|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Model Code:||BM852|
|Output Style:||D||Gear Type:||Worm|
|Ratio Range:||10:1||Overhung Load:||3,370|
|Shaft Seal Material:||Viton||Output Diameter (in):||2.000 in|
|Output HP:||21.73||Output Shaft Orientation:||D|
|Output shaft:||Shaft||Input RPM:||1,750|
|Assembly:||BM-D||Reducer Style:||Worm - Right Angle|
|Input Style:||C-Face Coupled||Input Keyway:||3/8 x 3/16|
|No. of Gear Reductions:||Single||Gear Drive Reductions:||Single|
|Input Bore (C Face):||1.625||Input Diameter (in):||1.625 in|
|Output Shaft Assembly Code:||D||Series Style:||GR-BM-D|
|Mounting Style:||Base||Center distance (inch):||5.25|
|Output Torque:||7827||Service Factor:||1|
|Series:||GR Series - Ironman Worm Gear Reducers|