Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BM852-30-D-210
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Input Style:||C-Face Coupled||Output Shaft Assembly Code:||D|
|Shaft Seal Material:||Viton||Gear Type:||Worm|
|Series:||GR Series - Ironman Worm Gear Reducers||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Input Diameter (in):||1.375 in||Input Bore (C Face):||1.375|
|Frame Size:||210||Series Style:||GR-BM-D|
|Housing material:||Cast Iron||Ratio Range:||30:1|
|Model Code:||BM852||Input RPM:||1,750|
|Product Type:||Right Angle||Output Key:||1/2 X 3.50|
|Assembly:||BM-D||Reducer:||Worm - Right Angle|
|Output Shaft Orientation:||D||Service Factor:||1|
|Output RPM:||58||Input HP:||10.538|
|Output Diameter (in):||2.000 in||Output HP:||8.91|
|Overhung Load:||3,560||No. of Gear Reductions:||Single|
|Center distance (inch):||5.25||Gear Drive Reductions:||Single|
|Reducer Style:||Worm - Right Angle||Output shaft:||Shaft|
|Input Keyway (C Face):||5/16 x 5/32||Output Torque:||9627|