Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BM852-40-R-210
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Gear Drive Reductions:||Single||Output Diameter (in):||2.000 in|
|Output Torque:||9419||Frame Size:||210|
|Output shaft:||Shaft||Output Style:||R|
|Output Key:||1/2 X 3.50||Input RPM:||1,750|
|Overhung Load:||3,560||Input Diameter (in):||1.375 in|
|Shaft Seal Material:||Viton||Input HP:||8.105|
|Input Keyway (C Face):||5/16 x 5/32||Reducer Style:||Worm - Right Angle|
|Ratio Range:||40:1||Input Bore (C Face):||1.375|
|Model Code:||BM852||Mounting Style:||Base|
|Service Factor:||1||Housing material:||Cast Iron|
|Center distance (inch):||5.25||Gear Type:||Worm|
|No. of Gear Reductions:||Single||Ratio:||40:1|
|Series Style:||GR-BM-R||Input Style:||C-Face Coupled|
|Product Type:||Right Angle||Output HP:||6.538|
|Assembly:||BM-R||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Output Shaft Orientation:||R||Series:||GR Series - Ironman Worm Gear Reducers|
|Output RPM:||43||Reducer:||Worm - Right Angle|
|Output Shaft Assembly Code:||R|