Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BM852-10-L-210
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Reducer Style:||Worm - Right Angle||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Series:||GR Series - Ironman Worm Gear Reducers||Product Type:||Right Angle|
|Model Code:||BM852||Series Style:||GR-BM-L|
|Gear Type:||Worm||Center distance (inch):||5.25|
|Reducer:||Worm - Right Angle||Ratio:||10:1|
|Input Keyway (C Face):||5/16 x 5/32||Output HP:||21.73|
|Input Bore (C Face):||1.375||Input HP:||23.15|
|Output Torque:||7827||Output Shaft Orientation:||L|
|Frame Size:||210||Ratio Range:||10:1|
|Output shaft:||Shaft||Output Style:||L|
|Output RPM:||175||Mounting Style:||Base|
|Housing material:||Cast Iron||No. of Gear Reductions:||Single|
|Output Key:||1/2 X 3.50||Input RPM:||1,750|
|Input Diameter (in):||1.375 in||Service Factor:||1|
|Gear Drive Reductions:||Single||Output Diameter (in):||2.000 in|
|Input Style:||C-Face Coupled||Assembly:||BM-L|
|Output Shaft Assembly Code:||L||Overhung Load:||3,370|
|Shaft Seal Material:||Viton|