Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BM852-50-R-180
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Reducer Style:||Worm - Right Angle||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Series:||GR Series - Ironman Worm Gear Reducers||Product Type:||Right Angle|
|Model Code:||BM852||Series Style:||GR-BM-R|
|Gear Type:||Worm||Center distance (inch):||5.25|
|Reducer:||Worm - Right Angle||Ratio:||50:1|
|Input HP:||6.777||Output Shaft Orientation:||R|
|Frame Size:||180||Output Key:||1/2 X 3.50|
|Service Factor:||1||Output Style:||R|
|Input RPM:||1,750||Input Keyway (C Face):||1/4 x 1/8|
|Input Diameter (in):||1.125 in||No. of Gear Reductions:||Single|
|Output HP:||5.199||Output shaft:||Shaft|
|Shaft Seal Material:||Viton||Overhung Load:||3,560|
|Output Diameter (in):||2.000 in||Housing material:||Cast Iron|
|Mounting Style:||Base||Input Bore (C Face):||1.125|
|Output Shaft Assembly Code:||R||Gear Drive Reductions:||Single|
|Input Style:||C-Face Coupled||Ratio Range:||50:1|