Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BM852-40-L-180
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Shaft Seal Material:||Viton||Ratio:||40:1|
|Series:||GR Series - Ironman Worm Gear Reducers||Input RPM:||1,750|
|Output Shaft Orientation:||L||Input Diameter (in):||1.125 in|
|Input Style:||C-Face Coupled||Model Code:||BM852|
|Reducer:||Worm - Right Angle||Reducer Style:||Worm - Right Angle|
|Output shaft:||Shaft||Mounting Style:||Base|
|Product Type:||Right Angle||Output Style:||L|
|Gear Drive Reductions:||Single||Output Shaft Assembly Code:||L|
|No. of Gear Reductions:||Single||Housing material:||Cast Iron|
|Ratio Range:||40:1||Output Torque:||9419|
|Series Style:||GR-BM-L||Overhung Load:||3,560|
|Input Bore (C Face):||1.125||Output Diameter (in):||2.000 in|
|Assembly:||BM-L||Output Key:||1/2 X 3.50|
|Input Keyway (C Face):||1/4 x 1/8||Gear Type:||Worm|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Input HP:||8.105|
|Output HP:||6.538||Output RPM:||43|
|Frame Size:||180||Center distance (inch):||5.25|