Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-B852-40-D
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Input Style:||Shaft||Ratio Range:||40:1|
|Output Style:||D||Output Shaft Assembly Code:||D|
|Series Style:||GR-B-D||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Input RPM:||1,750||Gear Type:||Worm|
|Shaft Seal Material:||Viton||Center distance (inch):||5.25|
|Ratio:||40:1||No. of Gear Reductions:||Single|
|Gear Drive Reductions:||Single||Output shaft:||Shaft|
|Product Type:||Right Angle||Output RPM:||43|
|Series:||GR Series - Ironman Worm Gear Reducers||Reducer:||Worm - Right Angle|
|Output Shaft Orientation:||D||Reducer Style:||Worm - Right Angle|
|Model Code:||B852||Overhung Load:||3,560|
|Input HP:||8.105||Output Torque:||9419|
|Housing material:||Cast Iron||Input Keyway:||1/4 X 3.00|
|Output Diameter (in):||2.000 in||Mounting Style:||Base|
|Service Factor:||1||Input Diameter (in):||1.25 in|
|Output Key:||1/2 X 3.50|