Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-B852-50-L
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Packaged Length:||40 Inches||Packaged Width:||37 Inches|
|Packaged Height:||20 Inches|
|No. of Gear Reductions:||Single||Output RPM:||35|
|Mounting Style:||Base||Series Type:||Cast Iron 800 Worm Gear Reducers|
|Output Shaft Orientation:||L||Output Torque:||9362|
|Input RPM:||1,750||Input Style:||Shaft|
|Output HP:||5.199||Input HP:||6.777|
|Series Code:||GR||Reducer Style:||Worm - Right Angle|
|Output Shaft Assembly Code:||L||Output Key:||1/2 X 3.50|
|Series Style:||GR-B-L||Output Style:||L|
|Overhung Load:||3,560||Ratio Range:||50:1|
|Input Diameter (in):||1.25 in||Product Type:||Right Angle|
|Output Diameter (in):||2.000 in||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Reducer:||Worm - Right Angle||Assembly:||B-L|
|Model Code:||B852||Housing material:||Cast Iron|
|Shaft Seal Material:||Viton||Gear Drive Reductions:||Single|
|Center distance (inch):||5.25||Input Keyway:||1/4 X 3.00|
|Output shaft:||Shaft||Gear Type:||Worm|
|Series:||GR Series - Ironman Worm Gear Reducers|