Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ842-10-H1-250-35
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Gear Drive Reductions:||Single||Bore Code:||35|
|Reducer Style:||Worm - Right Angle||Output Torque:||5042|
|Ratio Range:||10:1||Series Style:||GR-HMQ-H1|
|Housing material:||Cast Iron||Output Style:||H1|
|Input Keyway (C Face):||3/8 x 3/16||Product Type:||Right Angle|
|Output Hollow Shaft Diameter (in):||2.188 in||Service Factor:||1|
|Frame Size:||250||Input Diameter (in):||1.625 in|
|Input HP:||14.93||Model Code:||HMQ842|
|Output shaft:||Hollow Bore||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Reducer:||Worm - Right Angle||Output HP:||14|
|Output Shaft Assembly Code:||H1||Output Key:||1/2 X 3.38|
|Mounting Style:||Shaft Mount||Assembly:||HMQ-H1|
|Input Bore (C Face):||1.625||Overhung Load:||3,010|
|Output RPM:||175||No. of Gear Reductions:||Single|
|Input RPM:||1,750||Center distance (inch):||4.25|
|Shaft Seal Material:||Viton||Input Style:||C-face Quill|
|Series:||GR Series - Ironman Worm Gear Reducers||Output Shaft Orientation:||H1|