Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ842-7.5-H1-250-35
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Input Diameter (in):||1.625 in||Frame Size:||250|
|Input HP:||16.27||Bore Code:||35|
|Housing material:||Cast Iron||Input Keyway (C Face):||3/8 x 3/16|
|Shaft Seal Material:||Viton||Output HP:||15.36|
|Product Type:||Right Angle||Overhung Load:||2,930|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Gear Drive Reductions:||Single|
|Output Shaft Orientation:||H1||Ratio Range:||7.5:1|
|Gear Type:||Worm||Mounting Style:||Shaft Mount|
|Input RPM:||1,750||Output shaft:||Hollow Bore|
|Series:||GR Series - Ironman Worm Gear Reducers||Center distance (inch):||4.25|
|Output Style:||H1||Service Factor:||1|
|Model Code:||HMQ842||Output Shaft Assembly Code:||H1|
|Reducer Style:||Worm - Right Angle||Output Hollow Shaft Diameter (in):||2.188 in|
|Ratio:||7.5:1||Output Key:||1/2 X 3.38|
|Input Style:||C-face Quill||Output Torque:||4148|
|No. of Gear Reductions:||Single||Reducer:||Worm - Right Angle|
|Input Bore (C Face):||1.625||Output RPM:||233|