Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ842-20-H1-210-32
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Output Shaft Orientation:||H1||Frame Size:||210|
|Input Diameter (in):||1.375 in||Housing material:||Cast Iron|
|Series:||GR Series - Ironman Worm Gear Reducers||Assembly:||HMQ-H1|
|Service Factor:||1||Shaft Seal Material:||Viton|
|Gear Drive Reductions:||Single||Ratio Range:||20:1|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Reducer:||Worm - Right Angle|
|Gear Type:||Worm||Input Style:||C-face Quill|
|Input HP:||9.462||Input RPM:||1,750|
|Output Key:||1/2 X 3.38||Output Style:||H1|
|Reducer Style:||Worm - Right Angle||Output shaft:||Hollow Bore|
|No. of Gear Reductions:||Single||Input Keyway (C Face):||5/16 x 5/32|
|Series Style:||GR-HMQ-H1||Center distance (inch):||4.25|
|Output RPM:||87||Output Shaft Assembly Code:||H1|
|Overhung Load:||3,320||Input Bore (C Face):||1.375|
|Model Code:||HMQ842||Mounting Style:||Shaft Mount|
|Ratio:||20:1||Product Type:||Right Angle|
|Bore Code:||32||Output Hollow Shaft Diameter (in):||2.000 in|
|Output Torque:||6092||Output HP:||8.458|