Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ842-7.5-H1-210-30

Catalog #:GR-HMQ842-7.5-H1-210-30
Part #:GR8420610.30
  • One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
  • Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
  • Large oil capacity provides positive splash lubrication and superior cooling capability.
  • Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
  • The unique quill seal guard protects the input seal from damage during motor installation.
  • Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
  • Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
  • All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
  • Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
  • Mounting dimensions are interchangeable with most industry standard reducers.
File is not found. Please try again or contact customer service.
Sorry, at this time this product does not comply with the standards of the country you selected.
This product complies with the standards of the country you selected.
The account you are currently on does not have access to purchase this product. Please change to your {0} account to purchase.
The following item(s) have been moved to {0}: {1}
Quantities over {0} may require additional lead time. A Regal representative will contact you if this occurs.
You can only order in multiples of {0}. Please enter a valid quantity for this item.
You have no products selected for comparison. Please select at least two products to compare using the 'Add to Compare' checkbox found on product list pages or product detail pages.
Sorry, this item is no longer available.
Available warehouses not found.
Weight:149 LB
List Price: $3,580.00

General Specifications

UPC: 69031002967 Weight: 149 LB

Technical Specifications

Output Style: H1 Input Diameter (in): 1.375 in
Reducer Style: Worm - Right Angle Model Code: HMQ842
Bore Code: 30 Gear Type: Worm
Service Factor: 1 Product Type: Right Angle
Output Shaft Orientation: H1 Mounting Style: Shaft Mount
Output Key: 1/2 X 3.38 Series: GR Series - Ironman Worm Gear Reducers
Output RPM: 233 Center distance (inch): 4.25
Shaft Seal Material: Viton Housing material: Cast Iron
Input RPM: 1,750 No. of Gear Reductions: Single
Ratio: 7.5:1 Reducer: Worm - Right Angle
Output shaft: Hollow Bore Output HP: 15.36
Output Shaft Assembly Code: H1 Input Style: C-face Quill
Gear Drive Reductions: Single Output Torque: 4148
Product Line: GR Series - Ironman Worm Gear Reducers Series Style: GR-HMQ-H1
Input HP: 16.27 Ratio Range: 7.5:1
Output Hollow Shaft Diameter (in): 1.875 in Frame Size: 210
Assembly: HMQ-H1 Input Keyway (C Face): 5/16 x 5/32
Input Bore (C Face): 1.375
This name is used, please enter another
{0} was created successfully.
{0} was deleted successfully.
Please select an account
Profile updated successfully.
Thank you for your registration request. We have submitted your information to your company's administrator for review and approval.
You have been logged out due to inactivity. Please log in again.