Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ842-50-H1-180-27

Catalog #:GR-HMQ842-50-H1-180-27
Part #:GR8420605.27
  • One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
  • Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
  • Large oil capacity provides positive splash lubrication and superior cooling capability.
  • Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
  • The unique quill seal guard protects the input seal from damage during motor installation.
  • Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
  • Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
  • All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
  • Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
  • Mounting dimensions are interchangeable with most industry standard reducers.
File is not found. Please try again or contact customer service.
Sorry, at this time this product does not comply with the standards of the country you selected.
This product complies with the standards of the country you selected.
The account you are currently on does not have access to purchase this product. Please change to your {0} account to purchase.
The following item(s) have been moved to {0}: {1}
Quantities over {0} may require additional lead time. A Regal representative will contact you if this occurs.
You can only order in multiples of {0}. Please enter a valid quantity for this item.
You have no products selected for comparison. Please select at least two products to compare using the 'Add to Compare' checkbox found on product list pages or product detail pages.
Sorry, this item is no longer available.
Discontinued
Available warehouses not found.
Weight:149 LB
UOM:EA
List Price: $3,580.00

General Specifications

UPC: 69031002952 Weight: 149 LB

Technical Specifications

Housing material: Cast Iron Input Style: C-face Quill
Product Line: GR Series - Ironman Worm Gear Reducers Output Shaft Orientation: H1
Output Hollow Shaft Diameter (in): 1.688 in Output Key: 3/8 x 3.00
Reducer Style: Worm - Right Angle Bore Code: 27
Mounting Style: Shaft Mount Input RPM: 1,750
Reducer: Worm - Right Angle Output RPM: 35
Input HP: 4.389 Ratio: 50:1
Service Factor: 1 Output shaft: Hollow Bore
Series: GR Series - Ironman Worm Gear Reducers Gear Type: Worm
Input Keyway (C Face): 1/4 x 1/8 Gear Drive Reductions: Single
Model Code: HMQ842 Series Style: GR-HMQ-H1
Center distance (inch): 4.25 Product Type: Right Angle
Frame Size: 180 Overhung Load: 3,730
No. of Gear Reductions: Single Ratio Range: 50:1
Shaft Seal Material: Viton Assembly: HMQ-H1
Output Style: H1 Output HP: 3.426
Input Diameter (in): 1.125 in Output Shaft Assembly Code: H1
Input Bore (C Face): 1.125 Output Torque: 6170
This name is used, please enter another
{0} was created successfully.
{0} was deleted successfully.
Please select an account
Profile updated successfully.
Thank you for your registration request. We have submitted your information to your company's administrator for review and approval.
You have been logged out due to inactivity. Please log in again.