Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ842-50-H1-180-23
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Output Shaft Orientation:||H1||Output Torque:||6170|
|Model Code:||HMQ842||Series:||GR Series - Ironman Worm Gear Reducers|
|Bore Code:||23||Output RPM:||35|
|Series Style:||GR-HMQ-H1||Input Bore (C Face):||1.125|
|Output shaft:||Hollow Bore||Output HP:||3.426|
|Ratio Range:||50:1||Output Style:||H1|
|Ratio:||50:1||Mounting Style:||Shaft Mount|
|Service Factor:||1||Reducer Style:||Worm - Right Angle|
|Input RPM:||1,750||Input HP:||4.389|
|Gear Type:||Worm||Input Keyway (C Face):||1/4 x 1/8|
|Input Diameter (in):||1.125 in||Output Hollow Shaft Diameter (in):||1.438 in|
|Frame Size:||180||Center distance (inch):||4.25|
|Input Style:||C-face Quill||Output Shaft Assembly Code:||H1|
|Output Key:||3/8 x 3.00||Gear Drive Reductions:||Single|
|Shaft Seal Material:||Viton||Assembly:||HMQ-H1|
|Overhung Load:||3,730||Housing material:||Cast Iron|
|Product Type:||Right Angle||No. of Gear Reductions:||Single|
|Reducer:||Worm - Right Angle||Product Line:||GR Series - Ironman Worm Gear Reducers|