Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ842-25-H1-180-31
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Series Code:||GR||Input Style:||C-face Quill|
|Input HP:||7.94||Series Type:||Cast Iron 800 Worm Gear Reducers|
|Output Key:||1/2 X 3.38||Output HP:||6.946|
|Output RPM:||70||Series Style:||GR-HMQ-H1|
|Mounting Style:||Shaft Mount||Output Torque:||6254|
|Output Shaft Orientation:||H1||Output Shaft Assembly Code:||H1|
|Reducer Style:||Worm - Right Angle||Bore Code:||31|
|Input RPM:||1,750||Keyway:||1/4 X 1/8|
|Output Style:||H1||Frame Size:||180|
|Gear Type:||Worm||Series:||GR Series - Ironman Worm Gear Reducers|
|Product Type:||Right Angle||Input Bore (C Face):||1.125|
|Shaft Seal Material:||Viton||Input Quill Diameter (in):||1.125 in|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Ratio Range:||25:1|
|Input Keyway (C Face):||1/4 x 1/8||Housing material:||Cast Iron|
|No. of Gear Reductions:||Single||Gear Drive Reductions:||Single|
|Assembly:||HMQ-H1||Output shaft:||Hollow Bore|
|Reducer:||Worm - Right Angle||Model Code:||HMQ842|
|Input Diameter (in):||1.125 in||Center distance (inch):||4.25|
|Output Hollow Shaft Diameter (in):||1.938 in|