Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ842-20-H1-180-32
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Reducer Style:||Worm - Right Angle||Series Code:||GR|
|Mounting Style:||Shaft Mount||Input HP:||9.462|
|Output Torque:||6092||Output Key:||1/2 X 3.38|
|Output Shaft Assembly Code:||H1||Bore Code:||32|
|Frame Size:||180||Input Style:||C-face Quill|
|Series Style:||GR-HMQ-H1||Output HP:||8.458|
|Output Shaft Orientation:||H1||Input RPM:||1,750|
|Keyway:||1/4 X 1/8||Series Type:||Cast Iron 800 Worm Gear Reducers|
|Nominal Motor HP Rating to HP @ 1750 RPM:||10||Output Style:||H1|
|Output RPM:||87||Input Keyway (C Face):||1/4 x 1/8|
|Ratio Range:||20:1||Product Type:||Right Angle|
|Housing material:||Cast Iron||Input Diameter (in):||1.125 in|
|Reducer:||Worm - Right Angle||Input Quill Diameter (in):||1.125 in|
|Gear Type:||Worm||Service Factor:||1|
|Ratio:||20:1||Input Bore (C Face):||1.125|
|No. of Gear Reductions:||Single||Assembly:||HMQ-H1|
|Output shaft:||Hollow Bore||Series:||GR Series - Ironman Worm Gear Reducers|
|Output Hollow Shaft Diameter (in):||2.000 in||Input Keyway:||1/4 X 2.50|
|Gear Drive Reductions:||Single||Center distance (inch):||4.25|
|Motor HP Rating:||10||Shaft Seal Material:||Viton|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Model Code:||HMQ842|