Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ842-40-H1-140-24
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Output Hollow Shaft Diameter (in):||1.500 in||Model Code:||HMQ842|
|Ratio Range:||40:1||Input Diameter (in):||0.875 in|
|Mounting Style:||Shaft Mount||Input RPM:||1,750|
|Output shaft:||Hollow Bore||Shaft Seal Material:||Viton|
|Housing material:||Cast Iron||Bore Code:||24|
|Output Style:||H1||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Frame Size:||140||Output Torque:||6156|
|Output Shaft Assembly Code:||H1||Ratio:||40:1|
|Input Keyway (C Face):||3/16 x 3/32||Input HP:||5.262|
|Series:||GR Series - Ironman Worm Gear Reducers||Gear Type:||Worm|
|Product Type:||Right Angle||Output HP:||4.274|
|Output Shaft Orientation:||H1||Input Bore (C Face):||0.875|
|Input Style:||C-face Quill||Service Factor:||1|
|Output Key:||3/8 x 3.00||Reducer:||Worm - Right Angle|
|Reducer Style:||Worm - Right Angle||Output RPM:||43|
|Center distance (inch):||4.25||Gear Drive Reductions:||Single|
|No. of Gear Reductions:||Single|