Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ842-5-H1-56-31
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Output Torque:||3209||Output Style:||H1|
|Input Bore (C Face):||0.625||Gear Drive Reductions:||Single|
|Mounting Style:||Shaft Mount||Center distance (inch):||4.25|
|Shaft Seal Material:||Viton||Gear Type:||Worm|
|Input Diameter (in):||0.625 in||Bore Code:||31|
|Input Keyway (C Face):||3/16 x 3/32||Output Hollow Shaft Diameter (in):||1.938 in|
|Reducer:||Worm - Right Angle||Ratio Range:||5:1|
|No. of Gear Reductions:||Single||Ratio:||5:1|
|Series:||GR Series - Ironman Worm Gear Reducers||Housing material:||Cast Iron|
|Input Style:||C-face Quill||Model Code:||HMQ842|
|Output Shaft Orientation:||H1||Output RPM:||350|
|Input RPM:||1,750||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Frame Size:||56||Series Style:||GR-HMQ-H1|
|Overhung Load:||2,800||Reducer Style:||Worm - Right Angle|
|Output HP:||17.25||Output Key:||1/2 X 3.38|
|Input HP:||18.08||Product Type:||Right Angle|
|Output shaft:||Hollow Bore||Output Shaft Assembly Code:||H1|