Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ842-10-L-250
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Output Shaft Assembly Code:||L||Series Style:||GR-BMQ-L|
|Output Key:||1/2 X 3.06||Output Style:||L|
|Series Type:||Cast Iron 800 Worm Gear Reducers||Series Code:||GR|
|Overhung Load:||3,010||Input RPM:||1,750|
|Input HP:||14.93||Output HP:||14|
|Output Shaft Orientation:||L||Output Torque:||5042|
|Mounting Style:||Base||Frame Size:||250|
|Reducer Style:||Worm - Right Angle||Output RPM:||175|
|Input Style:||C-face Quill||No. of Gear Reductions:||Single|
|Keyway:||3/8 X 3/16||Model Code:||BMQ842|
|Ratio Range:||10:1||Output shaft:||Shaft|
|Reducer:||Worm - Right Angle||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Series:||GR Series - Ironman Worm Gear Reducers||Shaft Seal Material:||Viton|
|Service Factor:||1||Center distance (inch):||4.25|
|Ratio:||10:1||Input Bore (C Face):||1.625|
|Housing material:||Cast Iron||Gear Type:||Worm|
|Assembly:||BMQ-L||Input Keyway (C Face):||3/8 x 3/16|
|Input Quill Diameter (in):||1.625 in||Gear Drive Reductions:||Single|
|Product Type:||Right Angle||Output Diameter (in):||1.875 in|
|Input Diameter (in):||1.625 in|