Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ842-25-L-210
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|No. of Gear Reductions:||Single||Ratio:||25:1|
|Frame Size:||210||Reducer:||Worm - Right Angle|
|Input Style:||C-face Quill||Output Shaft Orientation:||L|
|Overhung Load:||3,445||Series:||GR Series - Ironman Worm Gear Reducers|
|Series Style:||GR-BMQ-L||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Input Bore (C Face):||1.375||Model Code:||BMQ842|
|Output Shaft Assembly Code:||L||Ratio Range:||25:1|
|Input HP:||7.94||Output Torque:||6254|
|Reducer Style:||Worm - Right Angle||Mounting Style:||Base|
|Output shaft:||Shaft||Shaft Seal Material:||Viton|
|Center distance (inch):||4.25||Gear Type:||Worm|
|Output Style:||L||Output Diameter (in):||1.875 in|
|Housing material:||Cast Iron||Output Key:||1/2 x 3.06|
|Output RPM:||70||Input RPM:||1,750|
|Input Diameter (in):||1.375 in||Product Type:||Right Angle|
|Gear Drive Reductions:||Single||Service Factor:||1|
|Input Keyway (C Face):||5/16 x 5/32|