Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ842-7.5-L-210
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Assembly:||BMQ-L||Gear Drive Reductions:||Single|
|Output Diameter (in):||1.875 in||Input Bore (C Face):||1.375|
|Mounting Style:||Base||Input RPM:||1,750|
|Shaft Seal Material:||Viton||Output Shaft Orientation:||L|
|Frame Size:||210||Input HP:||16.27|
|Gear Type:||Worm||Output shaft:||Shaft|
|Output Style:||L||Input Keyway (C Face):||5/16 x 5/32|
|Output Shaft Assembly Code:||L||Housing material:||Cast Iron|
|Model Code:||BMQ842||No. of Gear Reductions:||Single|
|Ratio Range:||7.5:1||Reducer Style:||Worm - Right Angle|
|Center distance (inch):||4.25||Output RPM:||233|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Output Torque:||4148|
|Input Diameter (in):||1.375 in||Series:||GR Series - Ironman Worm Gear Reducers|
|Service Factor:||1||Overhung Load:||2,930|
|Output HP:||15.36||Output Key:||1/2 x 3.06|
|Input Style:||C-face Quill||Product Type:||Right Angle|
|Reducer:||Worm - Right Angle|