Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ842-30-D-180
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Product Line:||GR Series - Ironman Worm Gear Reducers||Input Bore (C Face):||1.125|
|Output HP:||5.517||Output RPM:||58|
|Input HP:||6.481||Model Code:||BMQ842|
|Gear Drive Reductions:||Single||Shaft Seal Material:||Viton|
|Service Factor:||1||Gear Type:||Worm|
|Reducer Style:||Worm - Right Angle||Assembly:||BMQ-D|
|Output Style:||D||Input Diameter (in):||1.125 in|
|Center distance (inch):||4.25||Output shaft:||Shaft|
|Output Shaft Assembly Code:||D||Series:||GR Series - Ironman Worm Gear Reducers|
|Output Key:||1/2 x 3.06||Series Style:||GR-BMQ-D|
|Housing material:||Cast Iron||Overhung Load:||3,550|
|Reducer:||Worm - Right Angle||Frame Size:||180|
|Input RPM:||1,750||Mounting Style:||Base|
|Input Keyway (C Face):||1/4 x 1/8||No. of Gear Reductions:||Single|
|Ratio Range:||30:1||Output Shaft Orientation:||D|
|Output Diameter (in):||1.875 in||Input Style:||C-face Quill|
|Product Type:||Right Angle|