Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ842-30-L-140
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Frame Size:||140||Output Style:||L|
|Output HP:||5.517||Output Diameter (in):||1.875 in|
|Input Bore (C Face):||0.875||Mounting Style:||Base|
|Input Diameter (in):||0.875 in||No. of Gear Reductions:||Single|
|Output RPM:||58||Reducer Style:||Worm - Right Angle|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Model Code:||BMQ842|
|Housing material:||Cast Iron||Output Shaft Orientation:||L|
|Product Type:||Right Angle||Output Shaft Assembly Code:||L|
|Output shaft:||Shaft||Input HP:||6.481|
|Service Factor:||1||Overhung Load:||3,550|
|Output Key:||1/2 x 3.06||Center distance (inch):||4.25|
|Shaft Seal Material:||Viton||Series Style:||GR-BMQ-L|
|Ratio:||30:1||Input Keyway (C Face):||3/16 x 3/32|
|Series:||GR Series - Ironman Worm Gear Reducers||Gear Drive Reductions:||Single|
|Input Style:||C-face Quill||Input RPM:||1,750|
|Ratio Range:||30:1||Output Torque:||5960|
|Reducer:||Worm - Right Angle|