Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BM842-5-L-210
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Output Shaft Assembly Code:||L||Ratio Range:||5:1|
|Center distance (inch):||4.25||Input Bore (C Face):||1.375|
|Input HP:||18.08||Input Diameter (in):||1.375 in|
|Product Type:||Right Angle||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Overhung Load:||2,800||Output RPM:||350|
|Output Diameter (in):||1.875 in||Mounting Style:||Base|
|Gear Drive Reductions:||Single||Model Code:||BM842|
|Gear Type:||Worm||Input RPM:||1,750|
|Reducer Style:||Worm - Right Angle||Input Keyway (C Face):||5/16 x 5/32|
|Reducer:||Worm - Right Angle||Assembly:||BM-L|
|Input Style:||C-Face Coupled||Output Shaft Orientation:||L|
|Output Style:||L||Frame Size:||210|
|Shaft Seal Material:||Viton||Ratio:||5:1|
|Series:||GR Series - Ironman Worm Gear Reducers||Output Torque:||3209|
|Series Style:||GR-BM-L||Output HP:||17.25|
|Output Key:||1/2 x 3.06||Service Factor:||1|
|No. of Gear Reductions:||Single||Housing material:||Cast Iron|