Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BM842-50-D-180
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Packaged Length:||40 Inches||Packaged Width:||37 Inches|
|Packaged Height:||17.5 Inches|
|Input RPM:||1,750||Mounting Style:||Base|
|Input Style:||C-Face Coupled||Series Style:||GR-BM-D|
|Reducer Style:||Worm - Right Angle||Output HP:||3.426|
|Series Code:||GR||No. of Gear Reductions:||Single|
|Output Torque:||6170||Input HP:||4.389|
|Keyway:||1/4 X 1/8||Output RPM:||35|
|Overhung Load:||3,730||Output Style:||D|
|Output Shaft Assembly Code:||D||Output Key:||1/2 X 3.06|
|Series Type:||Cast Iron 800 Worm Gear Reducers||Frame Size:||180|
|Output Shaft Orientation:||D||Assembly:||BM-D|
|Model Code:||BM842||Input Diameter (in):||1.125 in|
|Input Keyway:||1/4 X 2.50||Gear Drive Reductions:||Single|
|Input Bore (C Face):||1.125||Reducer:||Worm - Right Angle|
|Ratio:||50:1||Housing material:||Cast Iron|
|Service Factor:||1||Output shaft:||Shaft|
|Output Diameter (in):||1.875 in||Ratio Range:||50:1|
|Gear Type:||Worm||Shaft Seal Material:||Viton|
|Input Keyway (C Face):||1/4 x 1/8||Center distance (inch):||4.25|
|Product Type:||Right Angle||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Series:||GR Series - Ironman Worm Gear Reducers|