Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BM842-80-R-180

Catalog #:GR-BM842-80-R-180
Part #:GR8420131.00
  • One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
  • Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
  • Large oil capacity provides positive splash lubrication and superior cooling capability.
  • Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
  • The unique quill seal guard protects the input seal from damage during motor installation.
  • Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
  • Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
  • All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
  • Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
  • Mounting dimensions are interchangeable with most industry standard reducers.
File is not found. Please try again or contact customer service.
Sorry, at this time this product does not comply with the standards of the country you selected.
This product complies with the standards of the country you selected.
The account you are currently on does not have access to purchase this product. Please change to your {0} account to purchase.
The following item(s) have been moved to {0}: {1}
Quantities over {0} may require additional lead time. A Regal representative will contact you if this occurs.
You can only order in multiples of {0}. Please enter a valid quantity for this item.
You have no products selected for comparison. Please select at least two products to compare using the 'Add to Compare' checkbox found on product list pages or product detail pages.
Sorry, this item is no longer available.
Discontinued
Available warehouses not found.
Weight:154 LB
UOM:EA
List Price: $2,781.00

General Specifications

Weight: 154 LB

Technical Specifications

Output Torque: 3620 No. of Gear Reductions: Single
Output Key: 1/2 X 3.06 Mounting Style: Base
Input RPM: 1,750 Output Shaft Orientation: R
Output Style: R Input HP: 1.76
Output HP: 1.257 Input Style: C-Face Coupled
Output RPM: 21 Frame Size: 180
Series Style: GR-BM-R Output Shaft Assembly Code: R
Overhung Load: 3,740 Series Code: GR
Series Type: Cast Iron 800 Worm Gear Reducers Reducer Style: Worm - Right Angle
Shaft Seal Material: Viton Input Keyway (C Face): 1/4 x 1/8
Center distance (inch): 4.25 Input Diameter (in): 1.125 in
Ratio Range: 80:1 Product Type: Right Angle
Output Diameter (in): 1.875 in Reducer: Worm - Right Angle
Input Keyway: 1/4 X 2.50 Assembly: BM-R
Ratio: 80:1 Product Line: GR Series - Ironman Worm Gear Reducers
Gear Type: Worm Model Code: BM842
Gear Drive Reductions: Single Series: GR Series - Ironman Worm Gear Reducers
Output shaft: Shaft Input Bore (C Face): 1.125
Service Factor: 1 Housing material: Cast Iron
This name is used, please enter another
{0} was created successfully.
{0} was deleted successfully.
Please select an account
Profile updated successfully.
Thank you for your registration request. We have submitted your information to your company's administrator for review and approval.
You have been logged out due to inactivity. Please log in again.