Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BM842-5-R-180
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Shaft Seal Material:||Viton||Series Style:||GR-BM-R|
|Output Shaft Assembly Code:||R||Ratio:||5:1|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Product Type:||Right Angle|
|Ratio Range:||5:1||Input Diameter (in):||1.125 in|
|Output Key:||1/2 x 3.06||Output Torque:||3209|
|Input RPM:||1,750||Series:||GR Series - Ironman Worm Gear Reducers|
|Input HP:||18.08||Gear Type:||Worm|
|Output Diameter (in):||1.875 in||Output RPM:||350|
|No. of Gear Reductions:||Single||Input Keyway (C Face):||1/4 x 1/8|
|Frame Size:||180||Mounting Style:||Base|
|Output shaft:||Shaft||Reducer Style:||Worm - Right Angle|
|Model Code:||BM842||Service Factor:||1|
|Center distance (inch):||4.25||Output Shaft Orientation:||R|
|Housing material:||Cast Iron||Output HP:||17.25|
|Input Style:||C-Face Coupled||Input Bore (C Face):||1.125|
|Overhung Load:||2,800||Reducer:||Worm - Right Angle|
|Gear Drive Reductions:||Single|