Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-B842-10-D
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Packaged Length:||40||Packaged Width:||37|
|Overhung Load:||3,010||Series Style:||GR-B-D|
|Output Shaft Assembly Code:||D||Series Type:||Cast Iron 800 Worm Gear Reducers|
|Output RPM:||175||Output Key:||1/2 X 3.06|
|Input HP:||14.93||Input RPM:||1,750|
|Reducer Style:||Worm - Right Angle||Output Torque:||5042|
|Input Style:||Shaft||Mounting Style:||Base|
|Output Shaft Orientation:||D||Output Style:||D|
|No. of Gear Reductions:||Single||Series Code:||GR|
|Output HP:||14||Gear Type:||Worm|
|Assembly:||B-D||Input Keyway:||1/4 X 2.50|
|Output Diameter (in):||1.875 in||Output shaft:||Shaft|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Ratio:||10:1|
|Series:||GR Series - Ironman Worm Gear Reducers||Model Code:||B842|
|Service Factor:||1||Gear Drive Reductions:||Single|
|Housing material:||Cast Iron||Reducer:||Worm - Right Angle|
|Center distance (inch):||4.25||Product Type:||Right Angle|
|Input Diameter (in):||1.25 in||Shaft Seal Material:||Viton|