Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ832-7.5-H1-180-24
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Product Type:||Right Angle||Output Shaft Orientation:||H1|
|No. of Gear Reductions:||Single||Reducer Style:||Worm - Right Angle|
|Output shaft:||Hollow Bore||Input RPM:||1,750|
|Gear Drive Reductions:||Single||Gear Type:||Worm|
|Shaft Seal Material:||Viton||Input Diameter (in):||1.125 in|
|Output Shaft Assembly Code:||H1||Input Bore (C Face):||1.125|
|Series:||GR Series - Ironman Worm Gear Reducers||Input HP:||8.863|
|Output Hollow Shaft Diameter (in):||1.500 in||Mounting Style:||Shaft Mount|
|Input Keyway (C Face):||1/4 x 1/8||Ratio Range:||7.5:1|
|Output HP:||8.264||Output Style:||H1|
|Output RPM:||233.3||Frame Size:||180|
|Model Code:||HMQ832||Reducer:||Worm - Right Angle|
|Series Style:||GR-HMQ-H1||Output Torque:||2232|
|Assembly:||HMQ-H1||Output Key:||3/8 x 3.00|
|Bore Code:||24||Center distance (inch):||3.25|
|Ratio:||7.5:1||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Service Factor:||1||Input Style:||C-face Quill|
|Housing material:||Cast Iron|