Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ832-5-H1-180-31
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Output HP:||11.29||Bore Code:||31|
|Frame Size:||180||Service Factor:||1|
|Input Keyway (C Face):||1/4 x 1/8||Output Style:||H1|
|Input HP:||11.92||Output Shaft Assembly Code:||H1|
|Input Diameter (in):||1.125 in||Product Type:||Right Angle|
|Output Hollow Shaft Diameter (in):||1.938 in||Assembly:||HMQ-H1|
|Series:||GR Series - Ironman Worm Gear Reducers||Series Style:||GR-HMQ-H1|
|Ratio Range:||5:1||Input Style:||C-face Quill|
|Shaft Seal Material:||Viton||No. of Gear Reductions:||Single|
|Overhung Load:||2,275||Output shaft:||Hollow Bore|
|Input RPM:||1,750||Model Code:||HMQ832|
|Center distance (inch):||3.25||Input Bore (C Face):||1.125|
|Gear Type:||Worm||Output Key:||1/2 X 3.38|
|Mounting Style:||Shaft Mount||Reducer Style:||Worm - Right Angle|
|Housing material:||Cast Iron||Gear Drive Reductions:||Single|
|Reducer:||Worm - Right Angle||Output Shaft Orientation:||H1|
|Output RPM:||350||Product Line:||GR Series - Ironman Worm Gear Reducers|