Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HM832-40-H1-180-20
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Ratio Range:||40:1||Model Code:||HM832|
|Reducer:||Worm - Right Angle||Input Style:||C-Face Coupled|
|Input Diameter (in):||1.125 in||Center distance (inch):||3.25|
|Bore Code:||20||Input Bore (C Face):||1.125|
|Output Hollow Shaft Diameter (in):||1.250 in||Mounting Style:||Shaft Mount|
|Output Shaft Orientation:||H1||Input RPM:||1,750|
|Frame Size:||180||Output Key:||1/4 X 2.50|
|Output shaft:||Hollow Bore||Gear Drive Reductions:||Single|
|Output Shaft Assembly Code:||H1||Product Line:||GR Series - Ironman Worm Gear Reducers|
|No. of Gear Reductions:||Single||Ratio:||40:1|
|Input Keyway (C Face):||1/4 x 1/8||Input HP:||2.926|
|Output HP:||2.293||Overhung Load:||2,275|
|Product Type:||Right Angle||Output RPM:||43|
|Output Style:||H1||Housing material:||Cast Iron|
|Series:||GR Series - Ironman Worm Gear Reducers||Service Factor:||1|
|Shaft Seal Material:||Viton||Series Style:||GR-HM-H1|
|Reducer Style:||Worm - Right Angle||Output Torque:||3303|