Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HM830-25-H1-180-23
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Output Shaft Assembly Code:||H1||Output Style:||H1|
|Output shaft:||Hollow Bore||Gear Drive Reductions:||Single|
|Input Keyway (C Face):||1/4 x 1/8||Reducer:||Worm - Right Angle|
|Output RPM:||70||Gear Type:||Worm|
|Bore Code:||23||Series:||GR Series - Ironman Worm Gear Reducers|
|Series Style:||GR-HM-H1||Shaft Seal Material:||Viton|
|Model Code:||HM830||Input RPM:||1,750|
|Output Key:||3/8 x 3.00||Product Type:||Right Angle|
|Ratio:||25:1||Input Diameter (in):||1.125 in|
|Reducer Style:||Worm - Right Angle||Input HP:||3.355|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Mounting Style:||Shaft Mount|
|Output Torque:||2527||Center distance (inch):||3.00|
|No. of Gear Reductions:||Single||Input Style:||C-Face Coupled|
|Housing material:||Cast Iron||Output Hollow Shaft Diameter (in):||1.438 in|
|Service Factor:||1||Ratio Range:||25:1|
|Output Shaft Orientation:||H1||Output HP:||2.807|
|Input Bore (C Face):||1.125|