Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-H830-15-H1-20
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Input Keyway:||3/16 X 1.63||No. of Gear Reductions:||Single|
|Gear Type:||Worm||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Output Shaft Orientation:||H1||Output HP:||4.311|
|Service Factor:||1||Output Style:||H1|
|Bore Code:||20||Product Type:||Right Angle|
|Output Key:||1/4 X 2.50||Series:||GR Series - Ironman Worm Gear Reducers|
|Input RPM:||1,750||Series Style:||GR-H-H1|
|Input Diameter (in):||0.875 in||Ratio Range:||15:1|
|Output Shaft Assembly Code:||H1||Overhung Load:||2,170|
|Input Style:||Shaft||Reducer Style:||Worm - Right Angle|
|Output shaft:||Hollow Bore||Shaft Seal Material:||Viton|
|Housing material:||Cast Iron||Gear Drive Reductions:||Single|
|Center distance (inch):||3.00||Assembly:||H-H1|
|Output Hollow Shaft Diameter (in):||1.250 in||Mounting Style:||Shaft Mount|
|Model Code:||H830||Reducer:||Worm - Right Angle|
|Output RPM:||116||Output Torque:||2329|