Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ830-30-L-180
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Input RPM:||1,750||Overhung Load:||2,170|
|Frame Size:||180||Output Shaft Assembly Code:||L|
|Input HP:||2.879||Output RPM:||58|
|Mounting Style:||Base||Series Code:||GR|
|Input Style:||C-face Quill||No. of Gear Reductions:||Single|
|Output Shaft Orientation:||L||Series Type:||Cast Iron 800 Worm Gear Reducers|
|Keyway:||1/4 X 1/8||Reducer Style:||Worm - Right Angle|
|Output Torque:||2519||Output Style:||L|
|Output Key:||1/4 X 1.75||Output HP:||2.332|
|Series Style:||GR-BMQ-L||Service Factor:||1|
|Center distance (inch):||3.00||Reducer:||Worm - Right Angle|
|Model Code:||BMQ830||Housing material:||Cast Iron|
|Output shaft:||Shaft||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Shaft Seal Material:||Viton||Ratio:||30:1|
|Series:||GR Series - Ironman Worm Gear Reducers||Product Type:||Right Angle|
|Gear Drive Reductions:||Single||Output Diameter (in):||1.250 in|
|Input Keyway (C Face):||1/4 x 1/8||Input Diameter (in):||1.125 in|
|Input Quill Diameter (in):||1.125 in||Input Bore (C Face):||1.125|