Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ830-20-L-180
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Reducer Style:||Worm - Right Angle||Overhung Load:||2,170|
|Output Key:||1/4 X 1.75||Frame Size:||180|
|Output Style:||L||Input Style:||C-face Quill|
|Series Code:||GR||No. of Gear Reductions:||Single|
|Output RPM:||87||Input HP:||3.947|
|Output Shaft Assembly Code:||L||Series Style:||GR-BMQ-L|
|Output Torque:||2454||Keyway:||1/4 X 1/8|
|Output Shaft Orientation:||L||Series Type:||Cast Iron 800 Worm Gear Reducers|
|Output HP:||3.407||Mounting Style:||Base|
|Input RPM:||1,750||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Shaft Seal Material:||Viton||Service Factor:||1|
|Input Bore (C Face):||1.125||Gear Drive Reductions:||Single|
|Series:||GR Series - Ironman Worm Gear Reducers||Input Quill Diameter (in):||1.125 in|
|Housing material:||Cast Iron||Gear Type:||Worm|
|Product Type:||Right Angle||Center distance (inch):||3.00|
|Input Diameter (in):||1.125 in||Assembly:||BMQ-L|
|Input Keyway (C Face):||1/4 x 1/8||Ratio Range:||20:1|
|Reducer:||Worm - Right Angle||Output Diameter (in):||1.250 in|