Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ830-80-D-140
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Input Style:||C-face Quill||Shaft Seal Material:||Viton|
|Output Diameter (in):||1.250 in||Reducer:||Worm - Right Angle|
|Output Style:||D||Model Code:||BMQ830|
|Gear Type:||Worm||Output Shaft Assembly Code:||D|
|Input Bore (C Face):||0.875||Input HP:||0.895|
|Mounting Style:||Base||Frame Size:||140|
|Service Factor:||1||Output shaft:||Shaft|
|Input Diameter (in):||0.875 in||Housing material:||Cast Iron|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Assembly:||BMQ-D|
|Output Torque:||1684||Overhung Load:||2,170|
|No. of Gear Reductions:||Single||Ratio Range:||80:1|
|Output Shaft Orientation:||D||Output Key:||1/4 x 1.75|
|Product Type:||Right Angle||Input RPM:||1,750|
|Series:||GR Series - Ironman Worm Gear Reducers||Gear Drive Reductions:||Single|
|Center distance (inch):||3.00||Series Style:||GR-BMQ-D|
|Output RPM:||21||Input Keyway (C Face):||3/16 x 3/32|
|Reducer Style:||Worm - Right Angle|