Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ830-30-R-140
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Series:||GR Series - Ironman Worm Gear Reducers||Input Style:||C-face Quill|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Frame Size:||140|
|Reducer:||Worm - Right Angle||Input HP:||2.879|
|Output RPM:||58||Output Shaft Orientation:||R|
|Mounting Style:||Base||Output shaft:||Shaft|
|No. of Gear Reductions:||Single||Overhung Load:||2,170|
|Product Type:||Right Angle||Input RPM:||1,750|
|Housing material:||Cast Iron||Ratio Range:||30:1|
|Reducer Style:||Worm - Right Angle||Ratio:||30:1|
|Center distance (inch):||3.00||Series Style:||GR-BMQ-R|
|Model Code:||BMQ830||Output Shaft Assembly Code:||R|
|Input Bore (C Face):||0.875||Output Diameter (in):||1.250 in|
|Input Keyway (C Face):||3/16 x 3/32||Output Torque:||2519|
|Input Diameter (in):||0.875 in||Gear Type:||Worm|
|Output Style:||R||Gear Drive Reductions:||Single|
|Output HP:||2.332||Shaft Seal Material:||Viton|
|Output Key:||1/4 x 1.75|