Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ830-30-L-140
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Mounting Style:||Base||Input HP:||2.879|
|Output Key:||1/4 X 1.75||Series Code:||GR|
|Output Shaft Assembly Code:||L||Output RPM:||58|
|Output Shaft Orientation:||L||Series Type:||Cast Iron 800 Worm Gear Reducers|
|Output Torque:||2519||Keyway:||3/16 X 3/32|
|Input RPM:||1,750||Series Style:||GR-BMQ-L|
|Reducer Style:||Worm - Right Angle||No. of Gear Reductions:||Single|
|Input Style:||C-face Quill||Output Style:||L|
|Output HP:||2.332||Frame Size:||140|
|Overhung Load:||2,170||Series:||GR Series - Ironman Worm Gear Reducers|
|Service Factor:||1||Reducer:||Worm - Right Angle|
|Housing material:||Cast Iron||Gear Type:||Worm|
|Output Diameter (in):||1.250 in||Input Bore (C Face):||0.875|
|Gear Drive Reductions:||Single||Center distance (inch):||3.00|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Input Diameter (in):||0.875 in|
|Input Quill Diameter (in):||0.875 in||Product Type:||Right Angle|
|Assembly:||BMQ-L||Input Keyway (C Face):||3/16 x 3/32|
|Shaft Seal Material:||Viton||Ratio Range:||30:1|