Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ830-30-L-56
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Mounting Style:||Base||Output Shaft Assembly Code:||L|
|Output Key:||1/4 X 1.75||No. of Gear Reductions:||Single|
|Keyway:||3/16 X 3/32||Output RPM:||58|
|Input Style:||C-face Quill||Output Style:||L|
|Series Type:||Cast Iron 800 Worm Gear Reducers||Output Shaft Orientation:||L|
|Output Torque:||2519||Input HP:||2.879|
|Reducer Style:||Worm - Right Angle||Series Code:||GR|
|Series Style:||GR-BMQ-L||Output HP:||2.332|
|Overhung Load:||2,170||Frame Size:||56|
|Input RPM:||1,750||Center distance (inch):||3.00|
|Shaft Seal Material:||Viton||Ratio:||30:1|
|Output Diameter (in):||1.250 in||Input Quill Diameter (in):||0.625 in|
|Ratio Range:||30:1||Housing material:||Cast Iron|
|Input Keyway (C Face):||3/16 x 3/32||Product Type:||Right Angle|
|Input Diameter (in):||0.625 in||Output shaft:||Shaft|
|Input Bore (C Face):||0.625||Series:||GR Series - Ironman Worm Gear Reducers|
|Model Code:||BMQ830||Service Factor:||1|
|Gear Drive Reductions:||Single||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Reducer:||Worm - Right Angle|