Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BM830-20-L-180
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Packaged Length:||19.38||Packaged Width:||15.13|
|Output Key:||1/4 X 1.75||Input HP:||3.947|
|Series Style:||GR-BM-L||Output HP:||3.407|
|Series Code:||GR||Output Style:||L|
|Keyway:||1/4 X 1/8||Series Type:||Cast Iron 800 Worm Gear Reducers|
|No. of Gear Reductions:||Single||Input RPM:||1,750|
|Input Style:||C-Face Coupled||Output Shaft Orientation:||L|
|Mounting Style:||Base||Reducer Style:||Worm - Right Angle|
|Output Torque:||2454||Output Shaft Assembly Code:||L|
|Output RPM:||87||Overhung Load:||2,170|
|Frame Size:||180||Output Diameter (in):||1.250 in|
|Model Code:||BM830||Input Keyway:||3/16 X 1.63|
|Assembly:||BM-L||Gear Drive Reductions:||Single|
|Service Factor:||1||Shaft Seal Material:||Viton|
|Gear Type:||Worm||Ratio Range:||20:1|
|Input Keyway (C Face):||1/4 x 1/8||Product Type:||Right Angle|
|Housing material:||Cast Iron||Input Bore (C Face):||1.125|
|Reducer:||Worm - Right Angle||Ratio:||20:1|
|Input Diameter (in):||1.125 in||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Output shaft:||Shaft||Center distance (inch):||3.00|
|Series:||GR Series - Ironman Worm Gear Reducers|