Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BM830-10-L-180
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Reducer Style:||Worm - Right Angle||Input HP:||6.151|
|Series:||GR Series - Ironman Worm Gear Reducers||Input Bore (C Face):||1.125|
|Output Shaft Assembly Code:||L||Mounting Style:||Base|
|Output Key:||1/4 x 1.75||Ratio:||10:1|
|Output Style:||L||Output Torque:||2037|
|Product Type:||Right Angle||Overhung Load:||2,170|
|Shaft Seal Material:||Viton||Output Shaft Orientation:||L|
|Gear Drive Reductions:||Single||Series Style:||GR-BM-L|
|Gear Type:||Worm||Ratio Range:||10:1|
|Frame Size:||180||Input RPM:||1,750|
|Output Diameter (in):||1.250 in||Center distance (inch):||3.00|
|Output shaft:||Shaft||Input Keyway (C Face):||1/4 x 1/8|
|Output RPM:||175||Housing material:||Cast Iron|
|Input Style:||C-Face Coupled||Service Factor:||1|
|Model Code:||BM830||Reducer:||Worm - Right Angle|
|Assembly:||BM-L||Input Diameter (in):||1.125 in|
|No. of Gear Reductions:||Single||Output HP:||5.655|
|Product Line:||GR Series - Ironman Worm Gear Reducers|