Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BM830-20-D-140
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Packaged Length:||19.38||Packaged Width:||15.13|
|Series Style:||GR-BM-D||Output HP:||3.407|
|Keyway:||3/16 X 3/32||Frame Size:||140|
|Overhung Load:||2,170||Mounting Style:||Base|
|Input HP:||3.947||Series Type:||Cast Iron 800 Worm Gear Reducers|
|Output Key:||1/4 X 1.75||Output Shaft Orientation:||D|
|Output Style:||D||Input Style:||C-Face Coupled|
|Output Shaft Assembly Code:||D||Output RPM:||87|
|Input RPM:||1,750||Reducer Style:||Worm - Right Angle|
|No. of Gear Reductions:||Single||Series Code:||GR|
|Output Torque:||2454||Gear Drive Reductions:||Single|
|Product Type:||Right Angle||Assembly:||BM-D|
|Input Diameter (in):||0.875 in||Gear Type:||Worm|
|Model Code:||BM830||Output shaft:||Shaft|
|Input Keyway:||3/16 X 1.63||Ratio Range:||20:1|
|Housing material:||Cast Iron||Series:||GR Series - Ironman Worm Gear Reducers|
|Input Bore (C Face):||0.875||Shaft Seal Material:||Viton|
|Center distance (inch):||3.00||Input Keyway (C Face):||3/16 x 3/32|
|Service Factor:||1||Reducer:||Worm - Right Angle|
|Output Diameter (in):||1.250 in||Product Line:||GR Series - Ironman Worm Gear Reducers|