Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BM830-15-R-140
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Ratio:||15:1||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Housing material:||Cast Iron||Series Style:||GR-BM-R|
|Frame Size:||140||Input HP:||4.843|
|Output Style:||R||Output RPM:||116|
|Assembly:||BM-R||Input Style:||C-Face Coupled|
|Mounting Style:||Base||Ratio Range:||15:1|
|Input Diameter (in):||0.875 in||Output shaft:||Shaft|
|No. of Gear Reductions:||Single||Gear Drive Reductions:||Single|
|Reducer:||Worm - Right Angle||Output HP:||4.311|
|Gear Type:||Worm||Output Shaft Assembly Code:||R|
|Output Diameter (in):||1.250 in||Output Shaft Orientation:||R|
|Model Code:||BM830||Reducer Style:||Worm - Right Angle|
|Service Factor:||1||Input RPM:||1,750|
|Center distance (inch):||3.00||Overhung Load:||2,170|
|Shaft Seal Material:||Viton||Input Bore (C Face):||0.875|
|Series:||GR Series - Ironman Worm Gear Reducers||Output Torque:||2329|
|Product Type:||Right Angle||Input Keyway (C Face):||3/16 x 3/32|
|Output Key:||1/4 x 1.75|