Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BM830-60-L-140
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Frame Size:||140||Series:||GR Series - Ironman Worm Gear Reducers|
|Mounting Style:||Base||Model Code:||BM830|
|Output Style:||L||Shaft Seal Material:||Viton|
|Gear Type:||Worm||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Ratio Range:||60:1||Input Bore (C Face):||0.875|
|Output Torque:||2413||Housing material:||Cast Iron|
|Gear Drive Reductions:||Single||Reducer:||Worm - Right Angle|
|Output HP:||1.117||Overhung Load:||2,170|
|Series Style:||GR-BM-L||Input Keyway (C Face):||3/16 x 3/32|
|Input RPM:||1,750||Center distance (inch):||3.00|
|Output Key:||1/4 x 1.75||Output RPM:||29|
|Output Shaft Orientation:||L||Ratio:||60:1|
|No. of Gear Reductions:||Single||Output Diameter (in):||1.250 in|
|Reducer Style:||Worm - Right Angle||Service Factor:||1|
|Output Shaft Assembly Code:||L||Assembly:||BM-L|
|Input Style:||C-Face Coupled||Input Diameter (in):||0.875 in|
|Input HP:||1.637||Product Type:||Right Angle|