Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BM830-40-L-140
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Packaged Length:||19.38||Packaged Width:||15.13|
|Output RPM:||43||Input RPM:||1,750|
|Series Style:||GR-BM-L||Output Style:||L|
|Series Type:||Cast Iron 800 Worm Gear Reducers||Input Style:||C-Face Coupled|
|No. of Gear Reductions:||Single||Frame Size:||140|
|Mounting Style:||Base||Output Torque:||2477|
|Reducer Style:||Worm - Right Angle||Series Code:||GR|
|Output Shaft Orientation:||L||Output Key:||1/4 X 1.75|
|Output HP:||1.72||Overhung Load:||2,170|
|Input HP:||2.251||Output Shaft Assembly Code:||L|
|Nominal Motor HP Rating to HP @ 1750 RPM:||2||Keyway:||3/16 X 3/32|
|Ratio:||40:1||Housing material:||Cast Iron|
|Series:||GR Series - Ironman Worm Gear Reducers||Center distance (inch):||3.00|
|Shaft Seal Material:||Viton||Input Quill Diameter (in):||0.875 in|
|Input Bore (C Face):||0.875||Service Factor:||1|
|Gear Drive Reductions:||Single||Input Keyway (C Face):||3/16 x 3/32|
|Input Keyway:||3/16 X 1.63||Output shaft:||Shaft|
|Reducer:||Worm - Right Angle||Input Diameter (in):||0.875 in|
|Model Code:||BM830||Output Diameter (in):||1.250 in|
|Ratio Range:||40:1||Gear Type:||Worm|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Motor HP Rating:||2|
|Assembly:||BM-L||Product Type:||Right Angle|