Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BM830-80-L-56
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Shaft Seal Material:||Viton||Ratio Range:||80:1|
|Reducer Style:||Worm - Right Angle||Mounting Style:||Base|
|Output Key:||1/4 x 1.75||Gear Type:||Worm|
|No. of Gear Reductions:||Single||Center distance (inch):||3.00|
|Input Keyway (C Face):||3/16 x 3/32||Output RPM:||21|
|Reducer:||Worm - Right Angle||Input Style:||C-Face Coupled|
|Input RPM:||1,750||Model Code:||BM830|
|Assembly:||BM-L||Product Type:||Right Angle|
|Gear Drive Reductions:||Single||Housing material:||Cast Iron|
|Frame Size:||56||Output shaft:||Shaft|
|Input Diameter (in):||0.625 in||Series Style:||GR-BM-L|
|Output Style:||L||Output Shaft Orientation:||L|
|Output HP:||0.585||Service Factor:||1|
|Output Diameter (in):||1.250 in||Output Shaft Assembly Code:||L|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Input Bore (C Face):||0.625|
|Input HP:||0.895||Overhung Load:||2,170|
|Series:||GR Series - Ironman Worm Gear Reducers|