Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BM830-40-L-56
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Packaged Length:||19.38||Packaged Width:||15.13|
|Series Style:||GR-BM-L||Output Shaft Orientation:||L|
|Keyway:||3/16 X 3/32||Output Shaft Assembly Code:||L|
|Input RPM:||1,750||Input HP:||2.251|
|Output Style:||L||Mounting Style:||Base|
|Frame Size:||56||Reducer Style:||Worm - Right Angle|
|Output HP:||1.72||No. of Gear Reductions:||Single|
|Input Style:||C-Face Coupled||Overhung Load:||2,170|
|Output RPM:||43||Series Type:||Cast Iron 800 Worm Gear Reducers|
|Output Torque:||2477||Series Code:||GR|
|Output Key:||1/4 X 1.75||Output shaft:||Shaft|
|Ratio Range:||40:1||Input Diameter (in):||0.625 in|
|Ratio:||40:1||Input Keyway (C Face):||3/16 x 3/32|
|Model Code:||BM830||Output Diameter (in):||1.250 in|
|Shaft Seal Material:||Viton||Series:||GR Series - Ironman Worm Gear Reducers|
|Gear Type:||Worm||Product Type:||Right Angle|
|Gear Drive Reductions:||Single||Input Bore (C Face):||0.625|
|Housing material:||Cast Iron||Input Keyway:||3/16 X 1.63|
|Reducer:||Worm - Right Angle||Service Factor:||1|
|Center distance (inch):||3.00||Assembly:||BM-L|
|Product Line:||GR Series - Ironman Worm Gear Reducers|