Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-B830-15-D
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Packaged Length:||19.38||Packaged Width:||15.13|
|Output Shaft Assembly Code:||D||Series Code:||GR|
|Output HP:||4.311||Output Torque:||2329|
|Series Type:||Cast Iron 800 Worm Gear Reducers||No. of Gear Reductions:||Single|
|Overhung Load:||2,170||Reducer Style:||Worm - Right Angle|
|Input RPM:||1,750||Output Style:||D|
|Output Shaft Orientation:||D||Input Style:||Shaft|
|Mounting Style:||Base||Output Key:||1/4 X 1.75|
|Input HP:||4.843||Output RPM:||116|
|Series Style:||GR-B-D||Input Diameter (in):||0.875 in|
|Center distance (inch):||3.00||Output Diameter (in):||1.250 in|
|Product Type:||Right Angle||Ratio:||15:1|
|Assembly:||B-D||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Reducer:||Worm - Right Angle||Model Code:||B830|
|Housing material:||Cast Iron||Ratio Range:||15:1|
|Shaft Seal Material:||Viton||Input Keyway:||3/16 X 1.63|
|Series:||GR Series - Ironman Worm Gear Reducers||Gear Type:||Worm|
|Gear Drive Reductions:||Single||Output shaft:||Shaft|